सुविधाएं | ||
1 | Research Areas | |
2 | Apparatus for determining thermal conductivity of sand | |
3 | Astro Furnace 2300 | |
4 | Atomic absorption spectometer. | |
5 | CamScan SEM with LINK AN 10000 EDS X-ray Microanalysis System (CRF) | |
6 | Cold model experimental setup | |
7 | Combined DTA,TG,TNA facilities upto 1713 K. | |
8 | Compilation facilities-40T | |
9 | Constant stress strain corrosion apparatus | |
10 | Continuous recording system for mass change under 0.01mgnder different atmospheric conditions. | |
11 | Conventional Brinel and Vickers Testing machines | |
12 | DC Sensitivity Bridge | |
13 | Directional solidification setup-developed indegeneously | |
14 | DTA, TG, TMA | |
15 | FU 100000 (German) Universal Testing Machine,capacity 4T/20T | |
16 | Fully equipped Metallography facilities | |
17 | Gas Analyser | |
18 | High energy ball mills | |
19 | High frequency induction furnace | |
20 | High temperature sintering furnace,(microprocessor controlled and programmable-1873K) | |
21 | High temperature viscometer | |
22 | Horizontal dilatometer upto 1773K,Other sintering furnaces | |
23 | Hot press (100 kg)-Indegeneously made | |
24 | Impact Testing Machine | |
25 | Indigeneously Developed High Voltage DC power supply | |
26 | Induction surface | |
27 | INSTRON 1344,Capacity 500KN | |
28 | Izod Impact testing machine | |
29 | JEOL JSM 5800 SEM with OXFORD ISI 300 EDS X-ray Microanalysis System (CRF) | |
30 | Linear contaction of castings during solidification | |
31 | Model Twin Impact Testing Machine,PT-30 | |
32 | Multichannel EGDN spectroscopy analyser | |
33 | Non isothermal kinetic setup | |
34 | Oil free compressor | |
35 | Optical Metallographic facilities including colour metallography | |
36 | Philips CM12 TEM (CRF) | |
37 | Philips X-ray Diffractometer | |
38 | Plasma furnace | |
39 | Plasma scan, LABTAM, ICP-8410 | |
40 | Plasma smelting reactor | |
41 | Powder dispenser | |
42 | Precise high temperature oil bath circulator | |
43 | Radioactive material handling facility | |
44 | Rapid solidification processing setup | |
45 | Rockwell cum Rockwell Superficial Hardness Tester | |
46 | Sand testing equipment. | |
47 | Scanning potentiostat | |
48 | Setup for thermogravity analysis | |
49 | Shimadzu Universal Testing Machine (20 T) | |
50 | Slow strain rate testing machine | |
51 | TG / DTA unit | |
52 | Vickers Microhardness Testing machine | |